Configured for real-time operator interface control and graphical process status display in automated field networks, the Omron NS5-TQ10B-ECV2 (NS5 Programmable Terminal) provides direct physical/electrical execution.

Model Suffix Engineering Architecture

The catalog code suffix system defines display hardware parameters, communication capabilities, housing colors, and system revision cycles:

• NS5: Defines the 5.7-inch display enclosure footprint within the Omron terminal family.
• TQ10: Designates a High-luminance TFT color LCD panel with QVGA resolution (320 x 240 pixels).
• B: Indicates a matte black front bezel finish.
• ECV2: Specifies embedded Ethernet communication capability combined with version cycle 2 core hardware and expanded memory capacity.

Hardware & Operating Specifications

Deterministic Industrial Networking and Firmware Flash Compatibility

The NS5-TQ10B-ECV2 maintains active memory link protocols across EtherNet/IP deterministic networks and host serial channels. Display graphics, alarm tables, and user macros execute from local high-speed non-volatile memory, bypassing backplane bus communication velocity limits. Firmware flash compatibility ensures synchronized tag updates and seamless background data transmission when communicating directly with Omron CS/CJ/NJ programmable logic controllers.

Package Component Breakdown

• 1 x Omron NS5-TQ10B-ECV2 Programmable Terminal
• 4 x Enclosure Panel Mounting Brackets and Screws
• 1 x Rubber Waterproof Sealing Gasket
• 1 x 24 VDC Power Input Terminal Block Connector

Field Installation & Enclosure Mounting Rules

Panel Cutout Sequence

• Cut a precise rectangular panel opening measuring 184 x 131 mm in the enclosure door.
• Place the rubber sealing gasket evenly around the rear perimeter ridge of the front frame.
• Slide the terminal body through the cutout and torque the four mounting brackets evenly to achieve an IP65 front water barrier.

Field Cabling Protocol

• Connect a clean 24 VDC supply feed using shielded twisted-pair wires terminated with insulated ferrules.
• Route Ethernet network drop lines through dedicated industrial conduits separated from motor drive power cabling.
• Land the functional ground terminal onto the primary panel grounding bus bar using a short, low-impedance conductor.

Technical Frequently Asked Questions

• What integrated communication ports are available on the NS5-TQ10B-ECV2?

  The unit features an integrated Ethernet port (100Base-TX / 10Base-T) alongside standard RS-232C serial interfaces.

• What input supply voltage is required to power the internal screen electronics?

  The unit operates on a nominal supply voltage of 24 VDC with a maximum power draw of 15 W.

• How does firmware flash compatibility affect system transfers?

  Firmware flash compatibility allows project screens and system software to update without interrupting host PLC execution.

• What display panel technology is deployed in the 5.7-inch screen?

  The terminal uses a high-luminance TFT color LCD panel with a native QVGA resolution of 320 x 240 pixels.

• What front protection rating is maintained after panel installation?

  When mounted using the supplied rubber gasket and brackets, the front panel conforms to IP65 ingress protection standards.

• How are real-time data tags synchronized over the industrial network?

  The unit uses direct memory link protocols over EtherNet/IP, storing screen graphics locally to eliminate communication delays.

• What does the "B" character signify in the model configuration string?

  The "B" designation indicates that the front bezel enclosure is manufactured with a black industrial finish.

• What thermal limits must be maintained inside the electrical cabinet?

  Ambient operating temperatures surrounding the terminal chassis must be maintained between 0 deg C and 50 deg C.