Configured for human-machine interface manipulation and real-time process visualization in automated machine cells, the Omron NS5-TQ11B-V2 (NS5-TQ11 Programmable Terminal) provides direct physical/electrical execution.

Hardware Identification & Designation

• NS5: 5.7-inch Display Class Hardware Platform
• TQ: Color TFT Liquid Crystal Display Assembly
• 11: Integrated Ethernet Communications Port (10/100Base-T)
• B: Black Enclosure Front Bezel Housing
• V2: System Hardware Revision Iteration

Equipment Parameters & Functional Attributes

Deterministic Network Bus & Firmware Flash Execution

The operator interface transfers user input commands and system parameters across 10/100Base-T Ethernet networks directly to host controllers. On unit startup, internal system routines execute firmware flash compatibility verification to validate installed runtime screen code against controller memory register structures, preventing transmission jitter and bit mapping mismatch during high-speed data exchanges.

Delivery Package Components

• 1 x Omron NS5-TQ11B-V2 Programmable Terminal Unit
• 4 x Panel Mounting Clamp Assemblies
• 1 x Power Supply Input Connector Block
• 1 x Waterproof Rubber Sealing Gasket

Mounting Setup & Wiring Guidelines

• Cut the designated rectangular opening into the control panel door and fit the sealing gasket into the rear perimeter slot of the front bezel.
• Insert the terminal into the panel cutout and tighten all four panel mounting clamps evenly to maintain IP65F front panel protection.
• Connect a 24 VDC power supply to the dedicated terminal block, keeping conductors separated from high-voltage motor power wiring.
• Connect the functional ground (FG) terminal to a dedicated low-impedance grounding bar inside the panel using stranded copper wire.

Frequently Asked Questions

• What display technology and resolution are built into the terminal screen?

  The unit features a 5.7-inch color TFT LCD display operating at a hardware resolution of 320 x 240 dots.

• What network interface is integrated into the rear housing assembly?

  The terminal incorporates a single 10/100Base-T Ethernet port for high-speed host controller communications.

• What physical dimensions define the outer enclosure housing?

  The outer frame measures 5.4 cm in depth, 19.5 cm in width, and 14.2 cm in height (5.4 cm x 19.5 cm x 14.2 cm).

• How does firmware flash compatibility affect unit operation during boot?

  System initialization verifies firmware flash checksums to match screen application code with connected controller protocols.

• What mounting method maintains front panel environmental sealing?

  Securing the unit with four panel clamps against the rubber gasket provides IP65F protection against water ingress.

• What is the net physical weight of the terminal hardware?

  The net hardware weight of the terminal unit is 1 kg (shipping weight 8 kg).

• How should communication cables be routed to prevent electrical interference?

  Route 10/100Base-T Ethernet lines through isolated low-voltage conduits away from heavy AC drive power lines.

• Can the terminal be replaced without shutting down system power supply lines?

  No, external 24 VDC supply power must be isolated prior to removing or installing the wiring block and terminal frame.